• CHISWICK, NSW
  • Plumber Chiswick Logo
  • Contact Us 24/7
  • 0402 067 453
  • 5 Practices to Reduce Water Heating Energy Consumption

    In every aspect of our lives, we hope to reduce our expenses and save it instead so we could use it for a more important reason. That is why most of us seek advice and tips on how to do it. We can find lots of life hacks and easy ways to reduce our bills on the internet. These tips and hacks are indeed very helpful to us not only in saving our hard-earned penny from high energy consumption, it can as well help our system perform efficiently without encountering troubles that would require the presence of a plumbing professional.

       Water heating bill is one of the greatest contributors of our utility bills. So we need to lessen our energy consumption in order for us to pay less when it comes to our utility bills. To help you do that, here are the five primary tips you should perform to save from your water heating and utility bills.

    Hot water heater tank insulation

       One of the cheapest and most affordable yet most effective way of reducing water heating bills is through insulating your water heater tanks to avoid heat loss. This simple insulation could be done by covering your unit with either side-slitted blanket or insulation foams that are accessible in the market. You have to do this especially when your water heaters are old and do not have built-in insulations.

       When you have a unit that is manufactured currently or in these modern days, you do not have to worry about insulating your unit because they are already manufactured with insulation to avoid heat loss of the heated water they would contain. This is one of the primary advantages of buying new models of hot water heater unit. However, if you want to stick with your old water heater units with no insulations, you have to insulate your tank and wrap it so you can save energy. You may not need to seek for a plumber’s assistance but you would need extra care and cautiousness when doing it.

    Shutting down of the tank’s thermostat

       By shutting down your unit’s thermostat, you can be able to save at least 3% to 5% of energy causing the same percentage of deduction to your bill. Aside from that, when you set the thermostat to more than 130 degrees, there will be a possibility that scalding would occur. It has been advised to set your thermostat to at most 120 degrees because it is a safe range but it can still give you the satisfactory hot water temperature you need. You will be satisfied while your water heating bills are reduced as well as the emergence of mineral accumulation within your water heater tanks and your pipes.

    Insulation of the unit’s exposed pipes

       When talking about insulation, it is not only the unit’s tank that needs insulation. Exposed pipes of the unit should also be insulated because it has been proven that insulated pipes could carry up to 4 degrees of water temperature in contrast to those uncovered pipes. In this case, you don’t have to wait longer for your water to heat up. In this case, you can be able to save money, energy and time. For gas water heaters, keep the insulation at least 6 inches from the flue or it might get caught by the fire if you keep it very close.

    Regularly drain the sediment

       When you utilise hard water in your home, it would really be unavoidable to find an accumulation of sediments in your water heater tank upon inspection. This sediment accumulation would certainly hinder your unit from functioning efficiently because these sediments will insulate the energy from the system that is supposed to heat the water the tank contains. It is advisable that you regularly drain the sediments by opening the drain valve underneath the tank. Draining this should be done at least once or twice a year to maintain your system’s effectiveness. When the burner is no longer covered with sediments, you would be guaranteed that your system would be functioning faster and more efficient.

    Use less hot water when bathing and washing

           If you want to lessen your hot water heating bill, use less hot water use during bathing and washing. In this case, you will be able to save at least 25% to 60% of your monthly water heating bill. Try to lessen your hot water consumption by using low-flow fixtures such as taps and shower heads.